Hybrid Solar Solutions is combining on grid solar with battery storage. In the past few years, the use of solar energy has increased as more people are aware of its environmental friendliness. This aims to provide a complete overview of the Hybrid Solar Solution, its Definition, How it works, its Importance, Types of Hybrid Panels, Pros and Cons of each type, and much more.
A Hybrid Solar Solutions contains solar panels, a hybrid inverter, and battery storage to create an uninterrupted energy solution. The solar panels store sunlight and convert it into electricity, while the battery storage stores excess energy for later use.
The functionality of this system starts from a Hybrid Solar Solutions that helps to capture the sunlight and then convert it into DC (Direct Current) electricity. The DC electricity from the Hybrid Solar Panel is converted into AC (Alternating Current) with the help of an Inverter. Then the excess solar energy produced during the day is stored in a Battery Storage for use at night or on cloudy days for a continuous electricity supply.
These systems combine the best features of grid-tied and off-grid solar systems, ensuring continuous solar power operation. When solar and battery energy are insufficient, then Grid Connection draws power from the grid and also exports excess energy to the grid. This way Hybrid Solar Solutions can be used even during a blackout!
There are various components involved in the working of the Hybrid PV System. The components involved are as follows –
They are installed on a rooftop or ground-mounted structure to get the maximum sunlight to convert solar energy into DC electricity.
They convert the DC electricity produced by Solar Panels into AC electricity which is then used by household appliances. There are some types of Inverters which contain string inverters, microinverters, and hybrid inverters all of which handle both solar and battery inputs.
These batteries store the extra solar energy generated so it can be used after sunset when there is low sunlight or on cloudy days. It contains a Battery Management System that helps monitor the charging and discharging of the battery to optimize its use and lifespan.
When the battery and solar energy are insufficient the grid connection helps to back up the power source and it allows the excess solar energy to be fed back to the grid. There are some areas where they can earn credits for exporting the excess energy to the grid.
To enhance the efficiency of the energy flow, Energy management helps to monitor and control its flow in the system. It also has smart technology which helps to store the power when it is most in demand.
It involves the use of batteries to save access to solar energy generated through solar panels. When the solar generation becomes low the batteries help to generate electricity so that there is no power outage.
These types of Hybrid Solar Solutions consist of Monocrystalline Solar Panel, Polycrystalline Solar Panel, Building Integrated Photovoltaic Solar Panel (BIPV), and Thin Film Solar Panel. Below is a brief description of each type with their pros and cons.
Monocrystalline solar panels have solar cells made from a single crystal of silicon. The Crystalline purity of Monocrystalline is higher than that of Polycrystalline solar. The efficiency of monocrystalline solar panels varies from 16 to 24%. These Solar Panels have longer energy production periods.
This Solar Panel is made up of several fragments of silicon melted together. The efficiency rate of Polycrystalline is between 14 to 20 %. The Crystalline purity is less in Polycrystalline. The production period is less compared to monocrystalline panels.
It is a solar power-generating product or system that is integrated into the parts of a building such as roofs and windows. This solar panel uses one of these two technologies: crystalline solar cells and Thin Film Solar cells. The average efficiency of this panel is around 5 to 10 %.
Like other solar panels, thin-film panels convert light energy into electrical energy via the photovoltaic effect. Unlike traditional systems, thin-film solar panels are lightweight and flexible second-generation cells. Each cell consists of three main parts: photovoltaic material, a conductive sheet, and a protective layer. There are various types of Thin Film Solar Panel namely amorphous silicon (a-Si) panels, Cadmium telluride (CdTe) panels, Copper indium gallium diselenide (CIGS) panels, and Organic photovoltaic (OPV) panels.
With the promise of a continuous power supply even during bad weather conditions or power outages, Hybrid Solar Solutions have been proven to be a great choice. When there is an overcast or even when the grid is down, there’s no need to worry because you will have an uninterrupted power supply.
Hybrid Solar Solutions are often said to be a one-time investment and it is not wrong. It not only saves you from the hikes in electricity bills in the years to come but also, you don’t have to spend your fortune buying the fuel because there’s no fuel needed to operate these. Apart from these benefits, the value of your property also increases once you get these reliable sources installed at your place. So if we compare your initial investment and ROI, this deal will only benefit you in the long run.
Once you have installed Hybrid Solar Solutions, you can proudly say that you utilize clean and renewable energy. Sunlight is the cleanest source of energy and unlike natural gas, coal, or nuclear fuel, using this doesn’t affect its availability on our planet, nor is any other dangerous by-product being released into our environment. Also, it reduces carbon footprint and is a sustainable source of power generation.
To get the most out of your Solar Hybrid Systems, you must ensure that the installation process is carried out carefully so you can get the full benefits. For lifelong efficiency, there are some key points to consider while getting a Hybrid Solar Solutions. While we are at it, let’s quickly get an overview of this reliable power source’s installation process.
For starters, you have to calculate the utilization of power on your property. It is important to have the data on power consumption by your appliances to choose the best. Choose a secure and clean space for installation, preferably with good weather conditions to make the most of your new Solar Hybrid Power resource.
Once you have chosen your space, all the required items can be transported to your location like Solar Panels, Inverters, Batteries, Meters, etc. Make sure to go through the manufacturer’s guidelines for the safety purposes, of both your and your equipment’s. Batteries and Inverters are set up before the installation of Solar Panels. Once both of these are working, then Solar Panels get fixed on your roof or the area you have chosen. Once done, then the Solar Panels get connected to the Batteries, Inverters, and the Controller.
The equipment should not be damaged during the shipment process. Damaged parts can lead to interruptions during the installation of a stable and efficient system. Monitoring and inspection are important to avoid malfunctions in your equipment. Solar panels and Frames should be checked and cleaned periodically to get the most out of your solar hybrid setup. For full efficiency and a longer lifespan of your system, ensure timely maintenance sessions are scheduled.
In conclusion, a hybrid solar power plant is a great initiative for sustainable energy generation. Installation of both solar panels and battery storage increases the efficiency in energy production. This blog has specified the meaning, types, and how these panels work, their efficiency, cost saving, and their environmental friendliness. As the world is shifting towards renewable energy solutions, the Hybrid solar Solutions has stood out with dual benefits as it also helps to produce solar energy and stores the excess power for later use. These power plants help in continuous power supply and have become an ideal type for residential and commercial applications. At Innocepts Solar, we provide solar power solutions and also suggest the best suited for you at your convenience. Let’s brighten the future with our hybrid solar power plants.